Name: LR16W Series
SKU: LR16W
Availability: InStock

LR16W SERIES

Single large scale perforated light shield. Curved reflector. 5.5″ deep.

Available in 2×2 and 2×4 module sizes.
Light shield, integrated with an internal Mylar panel, envelopes the LED light source allowing maximum light transmission while eliminating pixilations and hot spots.
Delivers a balanced amount of horizontal and vertical illumination.
Digital LED technology provides high efficacy and energy efficiency.
Multiple power and light levels are offered as standard to allow meeting design and energy needs per application. Custom factory set levels available on request.
Lumen maintenance; Reported L70 (hours) & L80 (hours) > 60,000.
CRI greater than 80.
Fixture lumens per watt ratios up to 86.

DOWNLOAD 2X2 SPEC SHEET

DOWNLOAD 2X4 SPEC SHEET

VIEW IES

Specification Information:

LED Modules:

High performance linear configured LED module boards.
Each board consists of multiple mid-power, high efficacy LEDs in a precise layout eliminating the need for supplemental heat sinking.
The boards produce an even and diffuse light which maximizes optical efficiency.
Compatible with the dimming performance of the LED driver.
Color temperatures available: 3000K, 3500K and 4000K.
Upon request: 5000K.

LED Drivers:

Factory programmable constant current LED power supply.
Multiple standard drive current outputs (factory set by Mercury) are cataloged with their corresponding lumen package offerings. Upon request, custom drive current outputs and lumen packages are available.
Note: Certain cataloged lumen packages may be provided with a non-programmable constant current LED power supply at Mercury’s discretion. Contact factory if critical.
Universal voltage input, 120V-277V, 50HZ-60HZ.
Specification grade dimming down to 1% on 0-10V dimming controls.
Optional pre-configured drive current drivers are available. Non-dimming.

LED Lumen Packages:

Cataloged standard lumen packages. See attached chart for full details.
Custom lumen packages pre-set are optional with programmable drivers only. Contact factory for details.

Housing:

All metal parts are fabricated in a computer-controlled operation from heavy gauge code grade cold rolled steel.
Rivets hold all parts together for strength and unity.
A custom formulated non-glare white powder coating is applied to the housing after fabrication providing a reflectivity of at least 90%.

Light Shield:

Fabricated from heavy gauge perforated steel.
Integrated with an internal white Mylar panel.

Standby Lighting Option:

Remote-mount self-contained module, 7W, 10W or 12W as specified.
Due to limited internal luminaire space, module will need to be remotely mounted above ceiling line by contractor. Module is wired in and connected to luminaire with armored cable. Some limitations apply, contact factory for more details.
Battery backup upon loss of power.

Installations:

Designed for installation into NEMA Type G lay-in acoustical grid ceiling systems, 1” grid or 9/16” fine-line grid.
For NEMA Type F dry wall applications an additional flange kit must be used with Type G housing.
Four pry-out style grid support clips are located on the housing sides.
Four auxiliary suspension points are also provided for securing to building structure.
A quick wiring access plate is located on back of the housing. Additional knockouts provided.
Factory installed power whips as specified.

Certificate of Safety Compliance and Listings:

Luminaire: UL and CUL listed 1598 and bears their label. Suitable for damp locations.
IC rated. (Some higher lumen packages may not qualify. See Lumen Package matrix).

Warranty:

5-year limited warranty is standard. Special 10-year warranty available on a job-to-job basis. Complete LED warranty terms available here.
Actual performance may differ as a result of end-user environment and application.
Most LED luminaires are suitable to operate in ambient temperatures from -20C (-4F) to 25C (77F).
The following exclusions apply: Luminaires with optional standby lighting option, integral lighting controls options, or wireless control options. Consult factory.
LM-79 testing was measured under a controlled 25C (77F) ambient operating temperature.

IES Downloads – 2X2:

CATALOG NUMBER	PHOTOMETRICS	IES	LUXIFLUX CALCULATOR
LR16W-22G-3100-40K-A40-UNI	DOWNLOAD PHOTOMETRICS	DOWNLOAD IES	LAUNCH LUXIFLUX CALCULATOR

IES Downloads – 2X4:

CATALOG NUMBER	PHOTOMETRICS	IES	LUXIFLUX CALCULATOR
LR16W-24G-4100-40K-A751-UNI	DOWNLOAD PHOTOMETRICS	DOWNLOAD IES	LAUNCH LUXIFLUX CALCULATOR
LR16W-24G-5900-40K-A751-UNI	DOWNLOAD PHOTOMETRICS	DOWNLOAD IES	LAUNCH LUXIFLUX CALCULATOR

Need help accessing our LUXIFLUX Calculator?

While visitors to our website are able to enjoy a Flash-free experience, we are still transitioning our LUXIFLUX Calculator. Until then, Flash is required for this experience, so you may not see the calculator column (pictured) until you to install, update, or enable Flash Player.

Need help? Click the button below for more information.

How to Install and Enable Adobe Flash