Name: M401 Series
SKU: M401
Availability: InStock

M401 SERIES

Enclosed and Gasketed
Fluorescent Lighting
Wet Location UL Listing

Enclosed and gasketed fiberglass luminaire designed and engineered to withstand most critical environments. Weather and chemical resistant, corrosion free, and impervious to vapors, dust, and moisture. UL listed for wet locations.

DOWNLOAD SPEC SHEET

VIEW IES

Specification Information:

Applications:

Food handling and processing facilities, manufacturing and fabricating, drug and chemical plants. Use in shower areas, parking garages, pedestrian and roadway tunnels, and outdoor public areas.

Modules:

Lengths of 4ft. and 8ft. utilize the corresponding linear T5, T5-HO, T8 and T8-HO fluorescent lamps. Linear T12-HO available for cold applications. On request a 2ft. module available.

T5 Lamps:

linear 28W-T5 or 54W-HO-T5; one, two, or three lamp cross-sections. Tandem lamping on 8ft. modules.

T8 Lamps:

linear 32W-T8; one, two, or three-lamp cross sections. 4ft. linear 44W-HO-T8; one-or two-lamp cross sections. Tandem lamping on 8ft. modules. 8ft. linear 59W-SL-T8 or 86W-HO-T8; one or two-lamp cross sections.

T12 Lamps:

linear 48-HO-T12 (60W) or 8ft. 96-HO-T12 (95W) for cold applications; one or two-lamp cross sections.

Diffusers:

Injection-molded clear virgin acrylic plastic with 25% DR added for strength and durability. Crepe pattern on the inside surface cuts glare while offering maximum light transmission. Smooth outside surface is resistant to dirt accumulation and bacterial growth and is easily cleaned.

Optional diffusers:

DR/clear acrylic plastic with 100% DR for breakage resistance. PPC/clear UV stabilized unbreakable polycarbonate material for freedom from abuse and vandalism.

Housings:

Compression molded in one-piece of non-conductive, non-corrosive, and self-extinguishing 5V-A fiberglass reinforced polyester. A poured continuous gasketing permanently bonds and fills perimeter channel where upon latching, the diffuser and housing form a liquid tight seal. Permanently finished in a pearl white color that never needs painting or refinishing.

Latches:

Unbreakable polycarbonate with cam action and self-locking feature to stay closed without hardware. Optional stainless steel latches are provided with tamperproof screws for added security against vandalism or unauthorized fixture entry. May be used without tamperproof screws.

Heavy gauge steel-wiring channel and reflectors:

Attached to the housing with internal brass studs for easy removal and quick installations. Contains the ballast, sockets, and all wiring on an easy to handle one-piece component. Finished in baked white enamel with a minimum reflectivity of 87%.

Optical reflectors:

CAD designed for optimal reflective performance. Fabricated from Miro-4 enhanced specular aluminum with a 95% reflectivity.

Ballasts T5:

Electronic programmed start, normal light output, high power factor, THD less than 10%. Up to 2-lamps per 28W-T5 ballast. Up to 4-lamps per 54W-HO-T5 ballast.

Ballasts T8:

Electronic instant start, normal light output, high power factor, THD less than 10%. Up to 4-lamps per 32W-T8 ballast. Up to 2-lamps per 59W-SL-T8 ballast. Optional 32W-T8 performances; rapid start, high light output, or low watt. Electronic rapid start and up to 2-lamps per 44W-HO-T8 and 86W-HO-T8 ballast.

Ballasts T12:

Electronic rapid start, normal light output, high power factor, THD less than 10%. Up to 2-lamps per ballast.

Cold temperature:

Most ballast/lamp combinations have zero degree F low temperature starting. Some HO types will start at -20 degree F. When critical specify low temp.

Voltage:

Multi-volt operates a range from 120V-277V, 50HZ-60HZ.

Emergency battery backup:

Integrated pack, vented housing, UL damp label only. Lumen output varies with lamp type.

Installations:

A 7/8” hole in each end for surface conduit entry and continuous feeds. Liquid tight plugs supplied. Two die-cast zinc weatherproof hubs with gaskets and plugs are supplied. Threaded for ½” pipe.

Mounting:

Mount individually or continuous. Various topside embossments contain drill points for job site mounting options. Proper sealing will maintain wet location status.

Optional Hangers:

Stainless steel “slide grip” style hanger brackets allow easy mounting without drilling housing. Hook under diffuser anywhere along length of housing. End chain brackets are held in place with hubs. Housing contains external threaded brass studs for other hanging options.

Listings:

UL and CUL listed 1598 and bears a UL wet location label. Approved by NSF International and bears their label. U.S. Dept. of Agriculture recognized. Union made and labeled.

IES Downloads:

CATALOG NUMBER	PHOTOMETRICS	IES	LUXIFLUX CALCULATOR
#06993 M401-232-OCT-ELB-120V	DOWNLOAD PHOTOMETRICS	DOWNLOAD IES	LAUNCH LUXIFLUX CALCULATOR
#10906 M401-332-OCT-MRT-ELB-UNI	DOWNLOAD PHOTOMETRICS	DOWNLOAD IES	LAUNCH LUXIFLUX CALCULATOR

Need help accessing our LUXIFLUX Calculator?

While visitors to our website are able to enjoy a Flash-free experience, we are still transitioning our LUXIFLUX Calculator. Until then, Flash is required for this experience, so you may not see the calculator column (pictured) until you to install, update, or enable Flash Player.

Need help? Click the button below for more information.

How to Install and Enable Adobe Flash