MD Series - 1 LAMP STAGGERED T5 - Mercury Lighting

fluorescent-md-1lamp-staggered-t5-close

MD SERIES

Linear T5
1-Lamp Fluorescent
Narrow Profile Staggered Strip

Narrow profile linear fluorescent staggered lamp strip de-signed for high efficient T5 or HO-T5 lamp and ballast technologies. Unique lamp staggering provides three inches of overlapping lamps, which prevents dark spots usually appearing where standard type strips are used. The result is a highly pleasing appearance of unbroken light.

DOWNLOAD SPEC SHEET

Specification Information:

Applications:

Smaller size affords greater design flexibility. Generally specified for direct or indirect cove and valence lighting in combination with all types of architectural details. Directional reflectors provide shielding and optical control.

Lamps:

Utilizes all linear T5 and HO-T5 fluorescent lamps. One-lamp cross section.

Lengths/Lamps:

2Ft/14W-T5 or 24W-HO-T5; 3Ft/21W-T5 or 39W-HO-T5; 4Ft/28W-T5 or 54W-HO-T5; 5Ft/35W-T5 or 80W-HO-T5. Other T5 lamps as specified or on request.

Ballasts T5 and HO-T5:

Electronic programmed start, normal light output, high power factor. THD less that 10% most ballast/lamp combinations. End-of-life safety shut down feature. Multi-volt operates a range from 120V-277V, 50HZ-60HZ. Lutron or Advance dimming ballasts as specified. Other performance ballasts as specified.

Optional wiring:

Single or dual circuit quick connect plug through wiring harnesses. Master-slave wiring.

Emergency battery back up:

Integrated pack ranges from 500-lumen output up to 1300 lumens. Varies with lamp type.

Housings:

Unitized housing from heavy gauge cold rolled steel. Welded ends and socket bars. Screw-down covers easily go in or out from tight spots. Easy install snap-in sockets for fast installation. Sufficient knockouts provided on fixture back and ends. Baked enamel finish provides minimum reflectivity of 87%.

Sockets:

Miniature T5 quarter-turn bi-pin rotary locking type.

Optional shielding and directional reflectors:

Asymmetric, symmetric, and direct-light designs. White enamel steel fin-ish or Miro-4 or equal enhanced specular aluminum with a 95% reflectivity. Custom shapes available.

Optional accessories:

Wired-in; GLR or GMF fusing.

Listing:

UL and CUL listed 1598 and bears their label. Suitable for dry locations or optional damp locations with UL Damp Label. Union made and labeled.