Name: LightStreams 3 Indirect
SKU: MLS3-I
Availability: InStock

MLS3-I | LIGHTSTREAMS 3

Nominal 3″ Wide/Suspended Indirect Linear LED

Indirect uplighting while being suspended from a ceiling.
Extruded aluminum housing for perfectly straight lines of light.
Narrow 3-inch wide profile.
Linear lengths; 2-ft. and above in increments of one inch.
Custom formulated high diffusion extruded acrylic lens.
Non-glare matte-white polyester powder coating finish.
Cable mount from ceiling.
Cataloged standard or custom set lumens-per-foot performances.
80 CRI standard. 90 CRI available.
Dimming down to 1% on 0-10V controls.
Fixture lumens per watt ratios up to 118.
Lighting controls and sensors.
Standard and custom corners
American Made.

DOWNLOAD A SPEC SHEET

CREATE A SPEC SHEET

VIEW IES

Specification Information:

Housing

Extruded aluminum profile in a 0.080-inch wall thickness.
Maximum length of each linear component is 12-ft.
14GA steel ends are provided where needed at row termini.
A one-piece 14GA galvanized steel joiner/aligner bracket is provided for each joint between housings.
Internal cold-rolled steel components.
Standard or custom hanging points are provided.
A custom formulated non-glare matte-white polyester powder coating provides an extremely durable and long lasting finish.
Custom color finishes on request.

Diffusers

Seamless fit diffusers. Flawless and consistent end-to-end fit.
Standard diffuser: extruded from custom formulated high transmission white acrylic material. Allows maximum light transmission while eliminating pixilation and hot spots.
Optional diffuser: extruded from acrylic smooth opal material. Offers a more esthetically white appearance. Note: reduces performance by up to 25%.
Smooth finish on both diffusers compliments the architectural elements.

LED Modules

High performance linear configured LED module boards.
Each board consists of multiple mid-power, high efficacy LEDs in a precise layout eliminating the need for supplemental heat sinking.
The boards produce an even and diffuse light which maximizes optical efficiency.
Compatible with the dimming performance of the LED driver.
Color temperatures available 80 CRI: 3000K, 3500K and 4000K. Upon request: 5000K.
Color temperatures available 90 CRI: 2700K, 3000K, 3500K and 4000K.

LED Drivers

Factory programmable constant current LED power supply.
Multiple standard drive current outputs (factory set by Mercury) are cataloged with their corresponding lumens-per-foot offering. Upon request, custom drive current outputs and lumens-per-foot options are available.
Note: Certain cataloged lumens-per-foot offerings may be provided with a non-programmable constant current LED power supply at Mercury’s discretion. Contact factory if critical.
Universal voltage input, 120V-277V, 50HZ-60HZ.
Specification grade dimming down to 1% on 0-10V dimming controls.
Sensor ready (SR) drivers compatible with most lighting controls are optional. Consult factory.
Lutron drivers available: LDE1 and LDE5 series.

Standby Lighting Options

Self contained module, 7W, 10W or 12W as specified. Battery backup upon loss of power. Available in modules of 4-ft. and longer.

Integral Lighting Controls

Various lighting controls and sensors are optional. Consult factory.

Corners

Standard 90 degree corners.
Custom angled corners.

Installations

Designed to be suspended on cables.
Lengths of 12-ft. and less to use one housing with two ends pre-installed.
Lengths over 12-ft. will be engineered to job requirements using multiple housings with one end pre-installed at each row end.
Lengths over 12-ft. will include appropriate job required quick-connect plug-thru wire harnesses and housing joiners.
All individual modules or multiple module runs to include job required feed wire as specified.
Standard or custom hanging points will be provided per job specifications.

Certificate of Safety Compliance and Listings

Luminaire: UL and CUL listed 1598 and bears their label. Suitable for damp locations.

Warranty

5-year limited warranty is standard. Special 10-year warranty available on a job-to-job basis. Complete LED warranty terms available here.
Actual performance may differ as a result of end-user environment and application.
Most LED luminaires are suitable to operate in ambient temperatures from -20C (-4F) to 25C (77F).
The following exclusions apply: Luminaires with optional standby lighting option, integral lighting controls options, or wireless control options. Consult factory.
LM-79 testing was measured under a controlled 25C (77F) ambient operating temperature.

Create a Spec Sheet:

IES Downloads:

CATALOG NUMBER	PHOTOMETRICS	IES	LUXIFLUX CALCULATOR
#11654729.12 MLS3-I-4-3000-(750 LMFT)-35K-HTA-A401-U	DOWNLOAD PHOTOMETRICS	DOWNLOAD IES	LAUNCH LUXIFLUX CALCULATOR
#11654729.11 MLS3-I-4-3800-(950 LMFT)-35K-HTA-A401-U	DOWNLOAD PHOTOMETRICS	DOWNLOAD IES	LAUNCH LUXIFLUX CALCULATOR

Need help accessing our LUXIFLUX Calculator?

While visitors to our website are able to enjoy a Flash-free experience, we are still transitioning our LUXIFLUX Calculator. Until then, Flash is required for this experience, so you may not see the calculator column (pictured) until you to install, update, or enable Flash Player.

Need help? Click the button below for more information.

How to Install and Enable Adobe Flash

MLS3-I | LIGHTSTREAMS 3

Specification Information:

Create a Spec Sheet:

OPTIONS

PROJECT INFORMATION

IES Downloads:

Need help accessing our LUXIFLUX Calculator?