MP65VP Series - T5 - Mercury Lighting

fluorescent-mp65vp-t5-close

MP65VP-T5 SERIES

Linear T5
Fluorescent Indestructible
Vandal Proof Luminaire

Vandal proof luminaire using the latest T5 fluorescent lamp and ballast technologies. Features an indestructible 16GA. steel housing, an unbreakable clear polycarbonate prismatic diffuser, and six tamperproof screws.
Designed to withstand severe cases of vandalism and abuse.
One or two-lamp cross sections, T5 or HO-T5 linear fluorescent.

DOWNLOAD SPEC SHEET

Specification Information:

Application:

Schools, public housing complexes, parking garages, hospitals, police precincts, recreation facilities, and all other medium to maximum-security locations.

Lamps/Nominal Lengths:

2FT/14W-T5 or 24W-HO-T5; 3FT/21W-T5 or 39W-HO-T5; 4FT/28W-T5 or 54W-HO-T5.

Housings:

Fabricated from 16GA. (.062”) cold rolled steel. End caps are drawn with a 5/8” flange on three sides to overlap and secure diffuser. Finished with a high quality white powder coating.

Tamperproof screws:

Three specially designed screws hold each end cap securely in place. Corresponding screwdriver required and is cataloged. Optional standard type screws available when tamper proofing not needed.

DIffuser:

Extruded from clear unbreakable polycarbonate material in a.125″ thickness. Treated with ultra-violet inhibitors. Sharp linear prisms along diffuser side panels, evenly spaced conical prisms along the bottom panel. Continuous tongue and groove fit along diffuser edges keeps it secure.

Optional diffuser:

Extruded from clear high impact acrylic-DR material for minimum-security jobs where the use of polycarbonate material may not be desired.

Ballasts T5 and HO-T5:

Electronic programmed start, normal light output, high power factor, THD less that 10% most ballast/lamp combinations. End-of-lamp life safety shut down feature. Multi-volt operates a range from 120V-277V, 50HZ-60HZ.

Emergency battery back up:

Integrated pack ranges from 500-lumen output up to 1600 lumens. Varies with lamp type. Test switch and light are internally mounted for se-cure protection of these components. External mounting available.

Installations:

Surface mount individually, ceiling or wall. Sufficient knockouts and holes for direct attachment to a junction box. Four additional 1/4″ mounting holes for secure anchoring. On request, row mounting, surface conduit entry, and surface mount junction box set-ups available.

Listing:

UL and CUL listed 1598 and bears their label. Suitable for dry locations or optional damp locations with UL Damp Label. Union made and labeled.